Exterior House Pricing
Aluminum Siding Homes
Aluminum siding homes require a good cleaner and pressure washing to remove oxidization from the original finish. If this isn’t removed the products will not get a good bond and the paint will be peeling in a few years even getting water behind the paint and ballooning up with water. Temperature is also a major concern if the temperature is going to drop below 50 degrees with 24 hours of painting aluminum siding you can have issues. Aluminum cools down very fast and this is what can cause issues if this occurs before the paint film fully sets up.
Aluminum Siding Homes
Depending on size and style
Vinyl Siding Home
Vinyl siding home cannot be painted with any color because certain tints added to paint can cause the plastic to get to hot and warp/melt the plastic.
Vinyl Siding Homes
Depending on size and style
Wood Homes
Wood homes are normally the most costly to paint especially when they are let go and start peeling and flaking off the existing paint. There loose and peeling paint must be removed and then spot primed before top coating with your finish paint. You also need to caulk vertical wood to wood surfaces and horizontal around door and window frames. This keeps the water from getting behind the wood and causing more problems later on. Lap siding, however, is overlapped so water doesn’t get under the edge and behind the siding. It is important to not caulk these areas because the house cannot breathe or let moisture/air out. This will cause the paint to bubble up within a few years if all the lap siding is caulked.
Wood Homes
Depending on size and style
There Are Many Factors To Pricing Exterior Projects
Prep and colors being the main factors, if there is a lot of scrapping, priming, and multiple colors it increases the pricing.
Because there are so many variables on the exterior surface an on-site estimate is the only way to accurately produce a cost estimate. However, please find the following pricing guidelines to help approximate the cost of your project:
Smooth Surface Siding
2 coats
Non-Painted Brick Surface
1 primer coat & 2 finish coats
Rough Cedar Siding
2 coats
Exterior Door
1 side 2 coats
Overhang Boxing
2 coats (Fascia, Soffit, Gutters)
Window Frame
2 coats
Miscellaneous Trim
2 coats
Single Garage Door
2 coats
Double Garage Door
2 coats
Surface Preparation
Interior House Pricing
Small Bathroom 6 x 6
Wall Surface
190 Sq Ft
Ceiling Surface
36 Sq Ft
Door and Casing
Per Side
Baseboard
24 Ln Ft
Small Room 10 x 12
Wall Surface
350 Sq ft
Ceiling Surface
120 Sq ft
Door and Casing
Per Side
Baseboard
44 Ln Ft
Medium Room 12 x 15
Wall Surface
430 Sq Ft
Ceiling Surface
180 Sq Ft
Door and Casing
Per Side
Baseboard
54 Ln Ft
Large Room 15 x 20
Wall Surface
560 Sq Ft
Ceiling Surface
300 Sq Ft
Door and Casing
Per Side
Baseboard
70 Ln Ft
Painted Woodwork (2 Coats On Previously Painted)
Baseboards
Chair Rail
Crown Molding
Door Frames
Door Frames
Wood Window Framing Vinyl Sashes
Windows With Wood Sashes
6-panel doors around
6-panel doors around
Handrail/Spindle Systems
Convert Oak/Stained To Painted Woodwork Pricing
Stain to paint 4 coats minimum
Baseboards
Chair Rail
Crown Molding
Door Frames
Door Frames
Wood Window Framing Only (Not Vinyl Sashes)
Windows With Wood Sashes Around
6-Panel Doors Around
6-Panel Doors Around
Handrail/Spindle Systems
Cabinet Pricing
These prices are for experienced painters that respect you, your property and belongings. They go over the project with you once it is completed to make sure there are no areas of concern. Cabinet projects are priced mostly per piece by counting the door and drawer faces. There are other factors that may increase the price but most are included. Some items that can make the price vary range from glass doors, islands, open shelves, oak wood, crown molding, decorative trim work, and other variables. $125-200 per piece is where most projects range and the average-sized kitchen is typically around 3000-4500. It is usually 10-20% the cost of refacing or replacing your kitchen cabinets not to mention how much time and headaches you will save refinishing.